China Drilling Stabilizer/Drill Stabilizer O. D 558.8mm with API Spec 7-1
We stick to the principle of “quality to start with, service initially, continual improvement and innovation to meet the customers” for your administration and “zero defect, zero complaints” as the standard objective. To fantastic our service, we offer the products using the very good high quality at the reasonable price for China Drilling Stabilizer/Drill Stabilizer O. D 558.8mm with API Spec 7-1, We also make sure that your assortment will be crafted while using the optimum quality and dependability. Make sure you experience totally free to make contact with us for more information and facts.
We stick to the principle of “quality to start with, service initially, continual improvement and innovation to meet the customers” for your administration and “zero defect, zero complaints” as the standard objective. To fantastic our service, we offer the products using the very good high quality at the reasonable price for China Drill Stabilizer, Drilling Stabilizer, Replaceable Stabilizer, Our faith is to be honest first, so we just supply high quality items to our customers. Actually hope that we can be business partners. We believe that we can establish long time business relationship with each other. You can contact us freely for more information and pricelist of our goods ! You are going to be Unique with our hair products and solutions !!
Replaceable sleeve stabilizer consists of mandrel and sleeve. The function is the same as spiral integral blade stabilizer. It can suit to different hole size and increase working life by changing the different size sleeve. The sleeve is threaded on the mandrel, so the sleeve can be fasten to the mandrel tightly and changed easily.
Technical Parameters:
Working outside diameter OD mm(inch) |
Salvage diameter OD mm(inch) |
Upper end |
Lower end |
Hole ID mm(inch) |
Neck length mm(inch) |
Total length mm(inch) |
Remarks |
149.2 (5 7/8) |
120.7 (4-3/4) |
NC38 |
NC38 |
50.8(2) |
559(22) |
1372 (54) |
Drill string type |
31/2REG |
Near bit type |
||||||
152 (6) |
120.7 (4-3/4) |
NC38 |
NC38 |
50.8(2) |
559(22) |
1372 (54) |
Drill string type |
31/2REG |
Near bit type |
||||||
215.9(8-1/2) |
165 (6-1/2) |
NC50 |
NC50 |
71.4 (2-13/16) |
686(27) |
1676(66) |
Drill string type |
41/2REG |
Near bit type |
||||||
311.15(12-1/4) |
203(8) |
6-5/8 REG |
6-5/8 REG |
71.4 (2-13/16) |
610(24) |
1550(61) |
Drill string type |
Near bit type |
|||||||
444.5(17-1/2) |
229(9) |
7-5/8 REG |
7-5/8 REG |
76.5(3) |
686(27) |
1702(67) |
Drill string type |
Near bit type |
|||||||
660.4 (26) |
241.3 (9 1/2) |
7-5/8 REG |
7-5/8 REG |
76.5(3) |
660(26) |
1930(76) |
Drill string type |
Near bit type |
|||||||
711.2(28) |
241.3 (9 1/2) |
7-5/8 REG |
7-5/8 REG |
76.5(3) |
686(27) |
1981(78) |
Drill string type |
Near bit type |