China wholesale Ep Lubricant - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI
China wholesale Ep Lubricant - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI Detail:
Product overview
XY-27 is used as a viscosity reducer (or deflocculant) in drilling fluids.A certain proportion of cation, anion and non -anion functional groups were introduced into its molecular chain.The presence of cationic groups greatly improves the XY-27′s ability to inhibit the dispersion and expansion of shale and enhance the inhibition of drilling fluid system. Therefore, XY-27 can not only significantly reduce the viscosity of drilling fluid, but also keep the viscosity of drilling fluid stable, showing strong anti-cuttings pollution ability.
Technical index
|
Project |
Index |
|
Appearance |
White or light yellow (granular) powder |
|
Water, % |
≤10.0 |
|
Water insoluble matter, % |
≤5.0 |
|
Screening allowance (sieve aperture 0.90 mm), % |
≤10.0 |
|
Apparent Viscosity (10% Aqueous Solution), MPa.s |
≤15.0 |
|
PH value |
5.5～8.0 |
|
Viscosity reduction rate, % |
≥70.0 |
|
Apparent Viscosity after Hot Rolling at 160 Temperature, MPa.s |
≤27.5 |
Product function
1. Less dosage, high viscosity reduction efficiency.
2. Strong inhibition, can inhibit the hydration and dispersion of mud shale and drilling cuttings.
3. Chrome-free and environmentally friendly.
4. Strong resistance to temperature and calcium salt.
5. Suitable for bentonite slurry, polymer drilling fluid and high-density drilling fluid.
In-field use
Recommended dosage: 0.1～0.3％.
Product detail pictures:
Related Product Guide:
Directional well essential-Downhole Motor
Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle
we can easily offer you high-quality products and solutions, competitive rate and very best shopper support. Our destination is "You come here with difficulty and we give you a smile to take away" for China wholesale Ep Lubricant - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI , The product will supply to all over the world, such as: New Delhi, Eindhoven, Manchester, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Atalanta from Berlin - 2018.10.01 14:14
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
By Yannick Vergoz from Bulgaria - 2017.02.18 15:54
