Excellent quality Downhole Motors - Multi-cycle Circulating Subs – LUQI
Excellent quality Downhole Motors - Multi-cycle Circulating Subs – LUQI Detail:
The “Multi-cycle Circulating Subs” is designed to via multiple pitches provide multiple water eye and loop switches’ joint.
The tool’s operation step is to use the pitching operation to switch the product on and off, with each pitch producing a specific switch position.
Advantage:
1. Multi-cycle Circulating Subs is an ideal tool for use in large displacement Wells and horizontal Wells.
2. By standard, all loop heads have two large loop interfaces to minimize the risk of clogging.
3. Multi-cycle Circulating Subs is the only product that allows reverse circulation of total flow area among similar tools.
4. Because of the unique design of Multi-cycle Circulating Subs, the flow interface is opened before the ball arrives at the collection joint, so as to prevent the ball from being arbitrarily cut into the collection basket.
5. The multi-cycle Circulating Subs can be opened in the predetermined position when entering the well.
6. The multi-cycle Circulating Subs can be switched at least 6 times, and the switching times can be increased if there are special requirements.
The multi-cycle Circulating Subs produced by our company is used well in Russia, Middle East and other countries.
Main Technical parameter
|
Model |
OD mm（inch） |
ID mm(inch) |
Connection thread |
Overall length mm（inch） |
|
MCCS121 |
121(4 3/4) |
45(1 3/4) |
NC38 |
2705（106 1/2） |
|
MCCS165 |
165(6 1/2) |
63.5(2 1/2) |
NC50 |
3445（135 5/8） |
|
MCCS178 |
178(7) |
63.5(2 1/2) |
NC50 |
3445（135 5/8） |
Product detail pictures:
Related Product Guide:
Directional well essential-Downhole Motor
We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Excellent quality Downhole Motors - Multi-cycle Circulating Subs – LUQI , The product will supply to all over the world, such as: Nepal, Madrid, Madras, Since the establishment of our company, we've realized the importance of providing good quality goods and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question points they do not understand. We break down these barriers to ensure you get what you want to the level you expect, when you want it.
By Liz from South Africa - 2017.08.28 16:02
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Marina from Kenya - 2017.06.29 18:55
