Factory supplied Barite Ore And Powder - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI
Factory supplied Barite Ore And Powder - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI Detail:
Product overview
XY-27 is used as a viscosity reducer (or deflocculant) in drilling fluids.A certain proportion of cation, anion and non -anion functional groups were introduced into its molecular chain.The presence of cationic groups greatly improves the XY-27′s ability to inhibit the dispersion and expansion of shale and enhance the inhibition of drilling fluid system. Therefore, XY-27 can not only significantly reduce the viscosity of drilling fluid, but also keep the viscosity of drilling fluid stable, showing strong anti-cuttings pollution ability.
Technical index
|
Project |
Index |
|
Appearance |
White or light yellow (granular) powder |
|
Water, % |
≤10.0 |
|
Water insoluble matter, % |
≤5.0 |
|
Screening allowance (sieve aperture 0.90 mm), % |
≤10.0 |
|
Apparent Viscosity (10% Aqueous Solution), MPa.s |
≤15.0 |
|
PH value |
5.5～8.0 |
|
Viscosity reduction rate, % |
≥70.0 |
|
Apparent Viscosity after Hot Rolling at 160 Temperature, MPa.s |
≤27.5 |
Product function
1. Less dosage, high viscosity reduction efficiency.
2. Strong inhibition, can inhibit the hydration and dispersion of mud shale and drilling cuttings.
3. Chrome-free and environmentally friendly.
4. Strong resistance to temperature and calcium salt.
5. Suitable for bentonite slurry, polymer drilling fluid and high-density drilling fluid.
In-field use
Recommended dosage: 0.1～0.3％.
Product detail pictures:
Related Product Guide:
Directional well essential-Downhole Motor
We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for Factory supplied Barite Ore And Powder - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI , The product will supply to all over the world, such as: Armenia, Honduras, Colombia, We have a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment.
By Elva from Israel - 2017.03.07 13:42
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Deirdre from Accra - 2018.12.25 12:43
