China Manufacturer for Tungsten Carbide Coating Layer Of Rotor - Replaceable Sleeve Stabilizer – LUQI factory and manufacturers

Manufacturer for Tungsten Carbide Coating Layer Of Rotor - Replaceable Sleeve Stabilizer – LUQI

Short Description:

Product Detail

Product Tags

Feedback (2)

Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Drawwork Air Clutch , Oil Lubrication Pump Assembly , Well Testing Choke Manifold , All of the time, we have been paying attention on all information to insure each product or service glad by our customers.

Manufacturer for Tungsten Carbide Coating Layer Of Rotor - Replaceable Sleeve Stabilizer – LUQI Detail:

Replaceable sleeve stabilizer consists of mandrel and sleeve. The function is the same as spiral integral blade stabilizer. It can suit to different hole size and increase working life by changing the different size sleeve. The sleeve is threaded on the mandrel, so the sleeve can be fasten to the mandrel tightly and changed easily.

Working outside diameter OD mm（inch）	Salvage diameter OD mm（inch）	Upper end Thread	Lower end Thread	Hole ID mm（inch）	Neck length mm（inch）	Total length mm（inch）	Remarks
149.2 （5 7/8）	120.7 (4-3/4)	NC38	NC38	50.8(2)	559(22)	1372 (54)	Drill string type
			31/2REG				Near bit type
152 （6）	120.7 (4-3/4)	NC38	NC38	50.8(2)	559(22)	1372 (54)	Drill string type
			31/2REG				Near bit type
215.9（8-1/2）	165 (6-1/2)	NC50	NC50	71.4 (2-13/16)	686（27）	1676（66）	Drill string type
			41/2REG				Near bit type
311.15（12-1/4）	203(8)	6-5/8 REG	6-5/8 REG	71.4 (2-13/16)	610（24）	1550（61）	Drill string type
							Near bit type
444.5（17-1/2）	229(9)	7-5/8 REG	7-5/8 REG	76.5(3)	686（27）	1702（67）	Drill string type
							Near bit type
660.4 (26)	241.3 (9 1/2)	7-5/8 REG	7-5/8 REG	76.5(3)	660（26）	1930（76）	Drill string type
							Near bit type
711.2（28）	241.3 (9 1/2)	7-5/8 REG	7-5/8 REG	76.5(3)	686（27）	1981（78）	Drill string type
							Near bit type

Product detail pictures:

Related Product Guide:
Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle

We are going to make every single effort for being excellent and excellent, and accelerate our ways for standing while in the rank of international top-grade and high-tech enterprises for Manufacturer for Tungsten Carbide Coating Layer Of Rotor - Replaceable Sleeve Stabilizer – LUQI , The product will supply to all over the world, such as: Nigeria, UK, Egypt, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.

10mm Diamond Drilling Tools

Api Grade Barite Powder

Api Manifold

Chain Compound System

This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.