Manufacturer for Tungsten Carbide Coating Layer Of Rotor - Zwitterionic Strong Coating For Drilling Fluid FA367 – LUQI
Manufacturer for Tungsten Carbide Coating Layer Of Rotor - Zwitterionic Strong Coating For Drilling Fluid FA367 – LUQI Detail:
Product overview
FA367is a water -soluble polymer which is composed of a variety of anionic and non -ionic organic monomers,an adhesive and coating agent for drilling fluid.
Technical index
Project |
指标Index |
Water(%) |
≤9.0 |
Screening allowance (sieve aperture 0.90 mm),% |
≤15.0 |
Apparent Viscosity (1% Aqueous Solution),MPa.s |
≥30.0 |
PH value |
7.5-9.0 |
Technical index
Project |
Apparent viscosity MPa.s |
Plastic viscosity MPa.s |
Filtrate loss ML |
|
4% bentonite Fresh water slurry |
Fresh water slurry |
8.0-10.0 |
3.0-5.0 |
22.0-26.0 |
Base slurry + 0.2g/L sample |
≥25.0 |
≥8.0 |
≤15.0 |
|
15% bentonite Compound brine slurry |
Basic pulp |
4.0-6.0 |
2.0-4.0 |
52.0-58.0 |
Base slurry + 0.7g/L sample |
≥15.0 |
≥10.0 |
≤10.0 |
|
Hot rolling at 160 C Apparent Viscosity Increase Rate |
Base Pulp + 20g Bentonite |
450-700 |
||
Base Pulp + sample+20g |
≤250 |
Product function
1. can improve the rheological property of drilling fluid. The drilling fluid prepared by FA367 has good carrying performance and can obtain the best borehole cleaning effect.
2. highly inhibiting to shale.
3. has good thermal stability in the application of oilfield. Resistence to temperature over 180°C.
4. excellent calcium salt resistance.
5. can effectively prevent oil and gas reservoir pollution, increase oil and gas production.
6. has great adaptability.Suitable for fresh water, sea water, saturated brine and Other kinds of water -based drilling fluids.
7. good compatibility with other treating agents.
In-field use
The normal dosage of FA367 is 0.2-0.4% for fresh water and 0.7-1.5% for saturated saline slurry.
Product detail pictures:
Related Product Guide:
Directional well essential-Downhole Motor
Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for Manufacturer for Tungsten Carbide Coating Layer Of Rotor - Zwitterionic Strong Coating For Drilling Fluid FA367 – LUQI , The product will supply to all over the world, such as: Anguilla , Luxemburg , Serbia , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and solutions and good service for domestic and international customers.
By Nainesh Mehta from Uruguay - 2018.11.06 10:04
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Diana from Ottawa - 2018.09.23 17:37