OEM Supply Hydraulic Type Drilling Jar - Multi-cycle Circulating Subs – LUQI
OEM Supply Hydraulic Type Drilling Jar - Multi-cycle Circulating Subs – LUQI Detail:
The “Multi-cycle Circulating Subs” is designed to via multiple pitches provide multiple water eye and loop switches’ joint.
The tool’s operation step is to use the pitching operation to switch the product on and off, with each pitch producing a specific switch position.
Advantage:
1. Multi-cycle Circulating Subs is an ideal tool for use in large displacement Wells and horizontal Wells.
2. By standard, all loop heads have two large loop interfaces to minimize the risk of clogging.
3. Multi-cycle Circulating Subs is the only product that allows reverse circulation of total flow area among similar tools.
4. Because of the unique design of Multi-cycle Circulating Subs, the flow interface is opened before the ball arrives at the collection joint, so as to prevent the ball from being arbitrarily cut into the collection basket.
5. The multi-cycle Circulating Subs can be opened in the predetermined position when entering the well.
6. The multi-cycle Circulating Subs can be switched at least 6 times, and the switching times can be increased if there are special requirements.
The multi-cycle Circulating Subs produced by our company is used well in Russia, Middle East and other countries.
Main Technical parameter
|
Model |
OD mm（inch） |
ID mm(inch) |
Connection thread |
Overall length mm（inch） |
|
MCCS121 |
121(4 3/4) |
45(1 3/4) |
NC38 |
2705（106 1/2） |
|
MCCS165 |
165(6 1/2) |
63.5(2 1/2) |
NC50 |
3445（135 5/8） |
|
MCCS178 |
178(7) |
63.5(2 1/2) |
NC50 |
3445（135 5/8） |
Product detail pictures:
Related Product Guide:
Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle
Adhering into the theory of "quality, services, efficiency and growth", now we have gained trusts and praises from domestic and international shopper for OEM Supply Hydraulic Type Drilling Jar - Multi-cycle Circulating Subs – LUQI , The product will supply to all over the world, such as: Oman, Liverpool, Boston, Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part products. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
By Henry from Montreal - 2018.11.02 11:11
Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
By Marjorie from Ethiopia - 2018.11.04 10:32
