OEM/ODM Supplier Packer Water Injection - EP Lubricant – LUQI
OEM/ODM Supplier Packer Water Injection - EP Lubricant – LUQI Detail:
Product overview
This product is based on mineral oil and vegetable oil, supplemented by extreme pressure additives containing S, B, N, etc., and surfactant. It is used to improve extreme pressure lubrication performance of high-density drilling fluid under high temperature and high salt content. The molecules contain strong adsorption groups and extremely high content of pressure elements, which can form chemical adsorption films with high strength and toughness on borehole walls and drilling tools, and contain strong hydrating groups with excellent salt resistance.
Technical index
|
Project |
Index |
|
|
Appearance |
viscous liquid |
|
|
Density, g/cm3 |
0.9±0.1 |
|
|
Reduction Rate of Lubrication Coefficient of Freshwater Slurry, % |
Room temperature |
≥60 |
|
150℃/16h |
≥60 |
|
|
20% Brine Slurry Lubrication Coefficient Reduction Rate, % |
Room temperature |
≥60 |
|
150℃/16h |
≥60 |
|
Product function
1. Excellent extreme pressure lubrication, suitable for directional wells, horizontal well sand other difficult wells.
2. Resistance to high temperature above150℃,can be used in deep well,ultra deep well.
3. Salt-resistant, suitable for fresh water, brine, saturated brine and seawater drilling and completion fluids.
4. No viscosity increase and filtration loss reduction, especially suitable for the control of lubrication performance of high-density drilling fluid.
5. Non-toxic, easy to biodegrade and conducive to environmental protection.
6. Good compatibility with treating agent.
Product detail pictures:
Related Product Guide:
Directional well essential-Downhole Motor
We always believe that one's character decides products' quality, the details decides products' high-quality ,together with the REALISTIC,EFFICIENT AND INNOVATIVE crew spirit for OEM/ODM Supplier Packer Water Injection - EP Lubricant – LUQI , The product will supply to all over the world, such as: Sweden, Karachi, Argentina, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Laurel from Lithuania - 2017.10.25 15:53
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Frances from Lithuania - 2018.12.25 12:43
