Wholesale Dealers of Hex Shank Drill Bit - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI
Wholesale Dealers of Hex Shank Drill Bit - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI Detail:
Product overview
XY-27 is used as a viscosity reducer (or deflocculant) in drilling fluids.A certain proportion of cation, anion and non -anion functional groups were introduced into its molecular chain.The presence of cationic groups greatly improves the XY-27′s ability to inhibit the dispersion and expansion of shale and enhance the inhibition of drilling fluid system. Therefore, XY-27 can not only significantly reduce the viscosity of drilling fluid, but also keep the viscosity of drilling fluid stable, showing strong anti-cuttings pollution ability.
Technical index
|
Project |
Index |
|
Appearance |
White or light yellow (granular) powder |
|
Water, % |
≤10.0 |
|
Water insoluble matter, % |
≤5.0 |
|
Screening allowance (sieve aperture 0.90 mm), % |
≤10.0 |
|
Apparent Viscosity (10% Aqueous Solution), MPa.s |
≤15.0 |
|
PH value |
5.5～8.0 |
|
Viscosity reduction rate, % |
≥70.0 |
|
Apparent Viscosity after Hot Rolling at 160 Temperature, MPa.s |
≤27.5 |
Product function
1. Less dosage, high viscosity reduction efficiency.
2. Strong inhibition, can inhibit the hydration and dispersion of mud shale and drilling cuttings.
3. Chrome-free and environmentally friendly.
4. Strong resistance to temperature and calcium salt.
5. Suitable for bentonite slurry, polymer drilling fluid and high-density drilling fluid.
In-field use
Recommended dosage: 0.1～0.3％.
Product detail pictures:
Related Product Guide:
Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle
Directional well essential-Downhole Motor
Our rewards are lower costs,dynamic profits team,specialised QC,potent factories,high-quality services for Wholesale Dealers of Hex Shank Drill Bit - Zwitterionic Polymer Viscosity Reducer XY-27 – LUQI , The product will supply to all over the world, such as: Nairobi, Kuwait, Japan, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By olivier musset from Hongkong - 2017.01.11 17:15
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Andy from Tunisia - 2017.04.08 14:55
