Wholesale Dealers of Steel Tooth Tricone Bittricone Rock Bit - EP Lubricant – LUQI
Wholesale Dealers of Steel Tooth Tricone Bittricone Rock Bit - EP Lubricant – LUQI Detail:
Product overview
This product is based on mineral oil and vegetable oil, supplemented by extreme pressure additives containing S, B, N, etc., and surfactant. It is used to improve extreme pressure lubrication performance of high-density drilling fluid under high temperature and high salt content. The molecules contain strong adsorption groups and extremely high content of pressure elements, which can form chemical adsorption films with high strength and toughness on borehole walls and drilling tools, and contain strong hydrating groups with excellent salt resistance.
Technical index
Project |
Index |
|
Appearance |
viscous liquid |
|
Density, g/cm3 |
0.9±0.1 |
|
Reduction Rate of Lubrication Coefficient of Freshwater Slurry, % |
Room temperature |
≥60 |
150℃/16h |
≥60 |
|
20% Brine Slurry Lubrication Coefficient Reduction Rate, % |
Room temperature |
≥60 |
150℃/16h |
≥60 |
Product function
1. Excellent extreme pressure lubrication, suitable for directional wells, horizontal well sand other difficult wells.
2. Resistance to high temperature above150℃,can be used in deep well,ultra deep well.
3. Salt-resistant, suitable for fresh water, brine, saturated brine and seawater drilling and completion fluids.
4. No viscosity increase and filtration loss reduction, especially suitable for the control of lubrication performance of high-density drilling fluid.
5. Non-toxic, easy to biodegrade and conducive to environmental protection.
6. Good compatibility with treating agent.
Product detail pictures:
Related Product Guide:
Directional well essential-Downhole Motor
Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle
Our organization sticks to your principle of "Quality may be the life of your organization, and reputation will be the soul of it" for Wholesale Dealers of Steel Tooth Tricone Bittricone Rock Bit - EP Lubricant – LUQI , The product will supply to all over the world, such as: Poland , Sri Lanka , Czech republic , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Clementine from Iraq - 2018.09.19 18:37
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Carol from Italy - 2018.11.28 16:25