High definition Api Downhole Drilling Motors - Multi-cycle Circulating Subs – LUQI
High definition Api Downhole Drilling Motors - Multi-cycle Circulating Subs – LUQI Detail:
The “Multi-cycle Circulating Subs” is designed to via multiple pitches provide multiple water eye and loop switches’ joint.
The tool’s operation step is to use the pitching operation to switch the product on and off, with each pitch producing a specific switch position.
Advantage:
1. Multi-cycle Circulating Subs is an ideal tool for use in large displacement Wells and horizontal Wells.
2. By standard, all loop heads have two large loop interfaces to minimize the risk of clogging.
3. Multi-cycle Circulating Subs is the only product that allows reverse circulation of total flow area among similar tools.
4. Because of the unique design of Multi-cycle Circulating Subs, the flow interface is opened before the ball arrives at the collection joint, so as to prevent the ball from being arbitrarily cut into the collection basket.
5. The multi-cycle Circulating Subs can be opened in the predetermined position when entering the well.
6. The multi-cycle Circulating Subs can be switched at least 6 times, and the switching times can be increased if there are special requirements.
The multi-cycle Circulating Subs produced by our company is used well in Russia, Middle East and other countries.
Main Technical parameter
|
Model |
OD mm（inch） |
ID mm(inch) |
Connection thread |
Overall length mm（inch） |
|
MCCS121 |
121(4 3/4) |
45(1 3/4) |
NC38 |
2705（106 1/2） |
|
MCCS165 |
165(6 1/2) |
63.5(2 1/2) |
NC50 |
3445（135 5/8） |
|
MCCS178 |
178(7) |
63.5(2 1/2) |
NC50 |
3445（135 5/8） |
Product detail pictures:
Related Product Guide:
Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle
Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for High definition Api Downhole Drilling Motors - Multi-cycle Circulating Subs – LUQI , The product will supply to all over the world, such as: United Arab Emirates, Montreal, Peru, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
By Eric from Russia - 2018.09.16 11:31
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Sophia from Bahrain - 2017.03.07 13:42
