Hot sale Drilling Drawworks With Oilfield - Bearing Plugging Angent for Drilling Fluid – LUQI
Hot sale Drilling Drawworks With Oilfield - Bearing Plugging Angent for Drilling Fluid – LUQI Detail:
Product overview
The bearing pressure plugging agent used in drilling fluid plays a good role in maintaining the stability of well wall, improving the bearing capacity of formation, eliminating pressure differential sticking, preventing drilling fluid leakage and all-round reservoir protection. Type Ⅲ is suitable for fresh water drilling fluid,type Ⅳ suitable for the brine drilling fluid.
Technical index
|
Project |
Index |
||
|
Type Ⅲ（freshwater） |
Type IV（seawater） |
||
|
Appearance |
Free-flowing powder |
||
|
Water，% |
≤10.0 |
||
|
ml |
Normal atmospheric temperature |
≤0 |
|
|
High temperature aging(150℃， 0.69MPa,16h) |
≤0 |
||
|
mm |
Normal atmospheric temperature |
≤280 |
|
|
High temperature aging(150℃， 0.69MPa,16h) |
≤300 |
||
Action principle
This agent is a special treatment agent of several kinds of composite polymer as the main functional materials, adding 1.5% ~ 2.0% of the material in common drilling fluid to improve the permeability resistance of drilling fluid, making it with higher pressure resistence and ultra-low permeability of the borehold wall. When it reaches the permeable layer it’ll immediately concentrate on the surface of the permeable layer and form a low permeability micellar sealing film to prevent the drilling fluid solid phase and its filtrate from immersing into the deep oil and gas layer,so as to realize near-zero filtration drilling.
Product function
1.effective sealing of permeable strata and micro-fracture strata with a wide range of pore throttles,with broad spectrum sealing ability for strata with different porosity and permeability.
2.As long as minimal reverse pressure is required for oil test or production,the sealing film will fall off and be removed by it self with out acid pickling and other measures, and the permeability recovery value of the reservoir is greater than 90%.
3.It can pass through the80-mesh screen smoothly,with good compatibility with mud,environmentally friendly,degradable and non-toxic.
Product detail pictures:
Related Product Guide:
Design Theory of Stator and Rotor of PDM Based on Rack Gearing Principle
Sticking for the perception of "Creating products of top quality and producing friends with people today from all around the world", we constantly place the desire of shoppers to start with for Hot sale Drilling Drawworks With Oilfield - Bearing Plugging Angent for Drilling Fluid – LUQI , The product will supply to all over the world, such as: Sevilla, Madagascar, Dubai, we've got all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Erin from Cancun - 2017.04.28 15:45
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Bruno Cabrera from Slovak Republic - 2018.11.02 11:11
